DeckingApril 20, 20265 min read

Do I Need a Deck Permit in Ontario? Brampton, Mississauga & Toronto

Ontario's Building Code Act covers structures over 10 m², but Toronto, Mississauga, Brampton and other GTA cities set their own deck permit lines, mostly by height and attachment. Here's each city's rule, what the application asks for and what else can apply.

Reviewed by Asghar Ali, Marketing Manager · Updated November 13, 2026

Raised deck with black metal railings and stairs leading down to an interlock patio with a fire pit

The short answer

Usually, yes. Most GTA cities require a permit for a deck more than about 600 mm (24 in) off the ground, and several also require one for any deck attached to the house, however low. But each city draws its own line.

Ontario's Building Code Act requires a permit for any structure over 10 m² (about 108 sq ft) built of a floor, walls or a roof, and each building department decides how that applies to decks. Vaughan, for example, exempts a detached, uncovered deck up to 18.6 m², well over 10 m², if it's no more than 0.6 m above grade.

Toronto (including North York, Etobicoke and Scarborough)

Toronto's permit list includes a deck added onto a house, any deck more than 60 cm (24 in) above the ground, and enclosing any deck. An uncovered deck no higher than 60 cm that isn't part of a required exit is listed as exempt, though zoning still applies. Those two lines overlap for a low deck attached to the house, so we confirm that case with Toronto Building first.

Mississauga

Mississauga requires a building permit for a deck more than 0.61 m (2 ft) high and for any covered porch. A deck under 600 mm doesn't need one, but it still has to meet the City's zoning rules.

Brampton

Brampton requires a building permit for any deck or porch attached or anchored to the house, or 0.6 m (2 ft) or more above the ground, and those decks must meet the Zoning By-law's setbacks and permitted encroachments. A deck under 0.6 m that isn't attached to the house needs no building permit.

Unlike Mississauga, Brampton also covers low attached decks, so a low deck skips the permit only if it's freestanding.

Other municipalities at a glance

MunicipalityPermit needed forWorth knowing
VaughanAny deck attached to the house, whatever its size or heightExempt: detached and uncovered, up to 18.6 m² (about 200 sq ft) and no more than 0.6 m above grade
MarkhamAny deck more than 600 mm (24 in) above the ground at any pointIts general permit list exempts decks under 600 mm, but its deck page adds attached decks and decks over 10 m², so we confirm low decks first
Richmond HillDecks that are attached, more than 600 mm above average grade, or over 10 m²Footings at least 1.2 m deep; no fastening to brick veneer
HamiltonAny attached deck, or one used with a pool; a detached covered deck over 10 m², or an uncovered one over 10 m² and more than 200 mm above grade; a smaller detached deck by a door, if it's more than 600 mm above gradeNew or replacement railings need a permit too
OshawaNew or replacement decks, including platforms attached to the house or an above-ground poolExempt: a house deck with no roof, no more than 600 mm (24 in) above ground
WhitbyAny residential deck more than 0.6 m (2 ft) above the groundLower decks still have to meet zoning
AjaxDecks and porches are a listed permit typeNo published size or height exemption, so we confirm each design
MiltonAny deck attached to a building or structure, or a freestanding deck over 10 m²If the Town hasn't assumed your subdivision, a developer's clearance letter from the builder comes first

For Burlington, see our Burlington deck permit page. In Oakville, we confirm the deck rules with the building department for each address.

What the application asks for

The drawing sets look much alike:

  • a site plan showing the house, the deck and its setbacks to the lot lines
  • a framing plan with footings, posts, beams, joists and, on an attached deck, the ledger
  • a section or elevations showing footing depth, guards and stairs

Toronto asks for scaled details of the footings, columns, beams, stairs and guards. Mississauga takes applications through ePlans, with metric drawings to scale showing soil bearing capacity, foundation sizes and guard heights, plus the Applicable Law Form and Schedule 1 designer information. Ajax wants pier size and depth and, for an attached deck, how it anchors to the house.

Guards, footings and inspections

In Milton (see our Milton deck permit page), the Town's sample drawings require a guard once the deck floor is 24 in (610 mm) or more above grade, and an engineer-stamped detail for a guard with non-wood parts or one taller than 3'-6", such as a privacy screen serving as the guard. Footings within 4 ft of the house foundation must go down to the foundation's level, and deck blocks are allowed only on a deck that isn't attached, carries no roof, sits no more than 23½ in from grade to the underside of the joists and covers no more than 592 sq ft. Typical inspections are footing, framing and final, booked through the Town's online portal once the permit is issued.

Approvals beyond the building permit

  • Conservation areas. In a conservation authority's regulated area, such as near a valley, creek, wetland or the Lake Ontario shoreline, a deck can need the authority's permit too. O. Reg. 41/24 exempts an unenclosed, detached deck of 15 m² or less that isn't cantilevered and isn't in a watercourse or wetland. Where TRCA regulates the lot, as it does along valleys and creeks in Markham and Ajax, the building permit can't be issued until TRCA gives a permit or clearance.
  • Heritage districts. New decks generally need a heritage permit in Brampton's Churchville district. In Mississauga's Old Port Credit Village district, a deck in any front or side yard needs one, as does a deck in the front yard or a side yard that abuts a street in Streetsville; in both districts, only a single-storey rear-yard deck out of street view is exempt.
  • Trees. Removing or injuring a private tree 30 cm or more in diameter needs a permit in Toronto (15 cm in Mississauga), which often decides where footings go.
  • Pools. A pool enclosure needs its own approval, and in Milton a pool deck may need a separate building permit (Milton pool fence permits).

Deck permit pages by city

Each page covers that city's deck permit triggers, what the application asks for and the inspections: Toronto · Mississauga · Brampton · Vaughan · Markham · Richmond Hill · Burlington · Hamilton · Oshawa · Whitby · Ajax · Milton.

How we handle it

We measure the yard and check zoning, setbacks and any conservation, heritage or tree issues. We draw the site plan, framing plan and sections to your city's rules, submit the application and answer review comments, then build to the approved plan and book each inspection as we go. See our permit drawings and deck building pages, or call 437-241-6287 for a free on-site visit.

deck permitsbuilding permitsdeckingtorontomississaugabramptonpermit drawingsontario

Free Estimate

Get a quote for your project.

Takes about 30 seconds. We reply within one business day.

Timeline

No obligation. We never share your details.

Prefer to talk? Call 437-241-6287

Frequently Asked

Quick answers.

It depends on your city and whether the deck is attached. Mississauga and Whitby don't require one for a deck under 600 mm (2 ft), but Brampton, Vaughan, Hamilton, Richmond Hill and Milton require a permit for any deck attached to the house, however low. Zoning setbacks apply either way.

Possibly. Toronto's permit list includes a deck added onto a house, but it also lists an uncovered deck no higher than 60 cm (24 in) that isn't part of a required exit as exempt, so we confirm that case with Toronto Building first. Any deck more than 60 cm above the ground needs a permit.

The Building Code Act requires a permit for any structure over 10 m² (about 108 sq ft) built of a floor, walls or a roof, but each building department decides how that applies to decks. Hamilton, Richmond Hill and Milton use a 10 m² test, Vaughan exempts some detached decks up to 18.6 m², and Toronto, Mississauga and Brampton draw their main line at about 600 mm above grade.

Usually a site plan with setbacks to the lot lines, a framing plan with footings, beams and joists, and a section or elevations showing guards and stairs. Mississauga takes metric drawings to scale through ePlans, and Milton wants PDFs generated from design software, not scans.

Sometimes. In a conservation authority's regulated area, a deck can need that authority's permit, and in heritage districts such as Brampton's Churchville, new decks generally need a heritage permit. Removing or injuring a protected tree to make room for footings needs a tree permit too.

Ready to start?

Get a free quote.

We measure, sketch, and price your project in writing within 48 hours. Serving the GTA from North York.