High-security mesh & palisade
Heavy-gauge welded mesh or steel palisade with anti-climb detailing for hard perimeters.
Security Fencing Contractors · Toronto & the GTAPerimeter security that holds the line.
Heavy-gauge security fencing, gates, and access control to secure industrial yards, compounds, and critical sites across the GTA.
Why Reformity
Why site security fencing with Reformity.
An industrial perimeter has one job: control who and what gets in. We install heavy-gauge fencing, anti-climb systems, and load-rated gates engineered to your security and operational needs — sized for the vehicles that pass through and built to resist the abuse a working yard delivers. Every install is documented for your security and insurance files.
Heavy-gauge, anti-climb systems
Commercial-grade mesh and palisade options with anti-climb and anti-cut detailing for genuine deterrence.
Frost-set, vehicle-rated posts
Posts set below the frost line in concrete and sized for gate loads — no leaning runs or sagging gates.
Load-rated gates & access
Swing, slide, and cantilever gates matched to your traffic, with operators and access control integration.
Secured-throughout install
We phase the work so your perimeter is never left open overnight during the transition.
Materials & Styles
What we work with.
Commercial chain-link
Galvanized or PVC-coated chain-link with top rail and barbed or razor toppers where required.
Gates & operators
Slide, cantilever, and swing gates with automated operators sized to your vehicle traffic.
Access control integration
Keypad, card, and intercom integration coordinated with your existing security systems.
Our Process
From quote to clean-up.
- 01
Site Assessment
We walk the perimeter, mark lot lines and utilities, and assess vehicle traffic, access points, and security priorities.
- 02
Engineered Scope & Quote
A fixed-price scope with fence type, post spacing, gate sizing, and access control engineered to your site.
- 03
Scheduled Execution
Installed in phases that keep the perimeter secured throughout the transition with minimal disruption to access.
- 04
Compliance Documentation & Sign-off
Layout drawings, gate specs, and access-control documentation delivered for your security and insurance files.
Pool enclosure fence — sheet 1 — Elevation, board-on-board section and post-footing detail. From a real Reformity permit drawing set, client details removed. Click to enlarge.
Fence permit drawing
Pool enclosure fence — sheet 2
Permit drawings included
We prepare and submit your permit drawings.
Site plans, details and sections drawn for your property and the municipality's requirements. We prepare the permit drawings and submit the applications — curb cuts, site alteration, fences and retaining walls included — so the work is approved before crews arrive.
- Dimensions to your lot lines
- Materials, sizes and spacing
- Footing and base sections
- Code notes for the inspector
Frequently Asked Questions
Quick answers.
It depends on the threat level and what you're protecting. Heavy-gauge welded mesh and steel palisade give the strongest anti-climb, anti-cut deterrence for high-value or critical sites, while commercial chain-link with a top rail and toppers is a cost-effective perimeter for general yards. We recommend the system based on your security priorities, vehicle traffic, and budget during the assessment.
Yes — that's a core part of how we plan industrial fence work. We phase the install so an open run is closed or temporarily secured before the crew leaves each day, and your perimeter is never left exposed overnight during the transition. We'll detail the phasing and any temporary measures in the proposal.
Yes. We install slide, cantilever, and swing gates with operators sized to your traffic, and we coordinate with keypad, card-reader, intercom, and existing security systems. We size the gate and operator to vehicle frequency and width so it holds up to constant industrial use rather than wearing out prematurely.
Not when posts are set correctly. We set posts below the frost line in concrete and size gate and corner posts for the loads they carry, which prevents the leaning runs and sagging gates you see when posts are undersized or set too shallow. Vehicle-exposed corners can also be protected with bollards, which we can include in scope.
Yes. We provide a Certificate of Insurance naming your entity and WSIB clearance certificates on request, and we complete site-specific contractor orientation and safety requirements before mobilizing on industrial and secured sites across the GTA.
Built for Industrial Sites
What facility & asset managers value.
"Reformity Inc. specified truck-rated asphalt for our yard and phased the work around shipping. No downtime, and the lot is holding up under daily trailer traffic."
"Loading dock apron and bollard work was done to spec, with full compliance documentation handed over at close-out. Reformity Inc. understood our safety requirements."
"We needed security fencing and access-controlled gates across a large site. Reformity Inc. scheduled around our 24/7 operations and kept the yard secure throughout."
GTA Cost & Bylaw Guides
Read before you build.
Ready to Build?